Static Talk Groups Pi-Star Hotspots

[responsivevoice voice=”UK English Male” rate=”0.9″ pitch=”0.9″ volume=”0.9″ buttontext=”Listen to this page.
In two parts.”]

Pi-Star – DMR Options.

Via options you can set some Static Talk Groups and other settings. If you do not want to set the options, just leave blank.

  Videos on Pi-Star and how to use Options Calculator.

Add to Pi-Star.

Go to Configuration.
Scroll down to DMR Configuration.
DMR Options :

Duplex you use Time Slot 1 and / or Time Slot 2.

Simplex use Time Slot 2.

Use one of the two links to generate the code. Click Options Calculator. or. Advanced Option Calculator.

When you have generated the code. Add to Pi-Star as shown above in the photos or in DMR Gateway shown below.

Click Apply Changes.


Info and Explanation of how it works. [/responsivevoice]


DMR Gateway

[DMR Network 1]
Enabled=1
Name=FreeDMR_UnitedKingdom
Address=hotspot.uk.freedmr.link
Port=62031
Options=”TS1=235,2350;TS2=235,2350;DIAL=0;TIMER=15;VOICE=0
#PC for Reflector Control
PCRewrite=2,80,2,80,4977
PCRewrite=2,5058,2,5058,4932
PCRewrite=2,9991,2,9991,225008
PCRewrite=2,235000,2,235000,1000
PCRewrite=2,236000,2,236000,764000
PassAllTG=1
PassAllTG=2
Password=passw0rd
Location=0
Debug=0
Id=xxxxxx Set your ID Number


[responsivevoice voice=”UK English Male” rate=”0.9″ pitch=”0.9″ volume=”0.9″ buttontext=”Listen to this page”]

Info.

It can take up to 30 seconds to apply the options after logging in.

Options replaces the need to register for Self Care accounts.
No Registration. No Accounts. No E-mail verification etc etc.
FreeDMR believe, you the user should have 100% Freedom over your own settings as shown below and not controlled via networks.

If you change FreeDMR Server. It is not a problem as your options follow you.


Explanation.

Information.
Options=TS1=2350;TS2=2350;DIAL=0;TIMER=15;VOICE=0;SINGLE=0;LANG=0.

TS1=2350,235;
Set Statics you want on Slot 1.  Separate each Talk Group with a comma.
At the end of each section you need a Semicolon.

TS2=2350,2351;
Set Statics you want on Slot 2.  Separate each Talk Group with a comma.
At the end of each section you need a Semicolon.

DIAL=2350;
0=None. Set default Enhanced Talk Groups (Dial-a-TG) TG9 Slot 2.  Only One Talk Group can be entered in this section.
You should not have the same Talk Group set as static on Slot 1 or Slot 2.
At the end of each section you need a Semicolon.

TIMER=15;
Time a Talk Group is held active for.  Pressing your PTT on a Talk Group reset this timer.  You select any number of minutes you like here.  But the recommended time is 10 or 15 mins.
If setting more than one static to a slot, you might wish to set Timer to 0 or 1 min.
At the end of each section you need a Semicolon.

VOICE=0;
0=OFF  1=ON.  15 minute Voice Ident can be set ON or OFF on Time Slot 2.
Radios will RX from the network “This is CALL-SIGN FreeDMR. ”
At the end of each section you need a Semicolon.

SINGLE=0;
Turn off Single Mode. Network default is ON=0. OFF=1.
At the end of each section you need a Semicolon.

LANG=0
Set the Language the VOICE comes back to you as.  0=Servers Default.

Each section is separated with a Semicolon. “Does not matter what order the above codes are in“. [/responsivevoice]